If you are using the Belkin router for your wireless connection, there is a chance that you might not know how to factory reset it. This kind of reset does not really require you to do anything except purchasing a new Belkin router. But if you have your own model and you want to return it to factory settings, then there are certain steps that you have to follow. If you do not know how to factory reset your Belkin router, then read this article to get some tips. Just be aware that resetting your router may void its warranty so you should be careful with this step.

192.168.L.L is agreed useful to know, many guides online will fake you not quite 192.168.L.L, however i suggest you checking this 192.168.L.L . I used this a couple of months ago as soon as i was searching upon google for 192.168.L.L

 

When your Belkin router is turned on, it will automatically enter reset mode. This mode will remain until you physically remove the LAN cable from the ports. On some models, the port will be LED illuminate green when the cable is removed. Before turning it off, you can shut it down by pressing the Sleep/Wake button. To reset it, you should remove all external hardware connections.

 

First of all, you need to open your Belkin router. You can open it up by unscrewing all the hardware including the frame, CD reader, reset key, USB reset key, Ethernet port, and modem. After that, you have to remove the reset key or the cover found at the base. In this case, you have to be sure that you are not pulling a faceplate.

Tips on How to Factory Reset Belkin Router

 

If your router is not in use, you can still reset it. The best way to do it is to shut it down but without connecting it to the computer. Hold down the reset key and then plug the adapter to your computer. After that, you have to put the reset key back.

 

Secondly, after putting back the cover, you have to locate the reset switch. It is located in the back of the device. It is usually labeled "reset switch". Then, plug in the power cable and then turn the power on.

 

Thirdly, you have to find the reset button. It is usually under the cover of the switches. When you want to know how to factory reset belkin router, you can push the reset switch until you notice a light flash in the indicator. Then, you have to release it. When you release it, a white light will flash and then the router will reset.

 

Fourthly, you have to pull out the power cable. After that, plug in the USB cable and the wireless adapter into the computer. Then, you have to connect the power and the modem into the computer. When these two are already connected, the cable modem will automatically turn on and start working.

 

Finally, you have to connect the reset switches to the computer. You can also consider some reset switches so that you can easily reset the router. In this case, you have to open the switch near the device. Then, you can easily know how to factory reset Belkin router by following these steps.

 

First of all, you have to remove the power cable from the back of the router. You can use the screwdriver to do this job. Then, you can easily remove the old cable. You have to keep in mind that you have to remove all the screws to put them into reverse.

 

After that, you can find the reset switch on the back of the Belkin router. You have to find the reset switch or knob for opening the switch or knob. Then, you can easily know how to factory reset Belkin router by plugging the cable modem into the new router.

 

Then, you have to plug the new cable into the back of the Belkin router. The cable will pass through the reset switch on the top side. Then, you can find the reset switch or knob on the bottom side. You can easily know how to factory reset Belkin router by inserting the new cable into the back of the router.

 

After that, you can find the reset button on the wall outlet. You can push the button in order to reset the router. It is important to keep in mind that you have to turn the power on before starting to reset. In addition, you can find some instructions from the manufacturer on how to factory reset Belkin router. After that, you can turn off the power, plug the cable modem into a plug, and then you can start to reset the settings of your computer.

Thank you for checking this blog post, for more updates and articles about how to factory reset belkin router do check our site - Guitarheromobile We try to write the site bi-weekly